HP Epoxy Primer
Product Description
This Epoxy Primer is a 2-pack primer-filler with good anti-corrosion properties. It is extremely fast drying when used as sealer or surfacer and offers very good adhesion to a wide variety of substrates, including aluminium, galvanized steel and GRP. It can also be directly recoated with polyester stopper, after drying and sanding.
It is mainly used in wet-on-wet systems but can be baked and flatted if required.
Product Code: 1.855.9900
Application Process
  |
Mixing Ratio by Volume HP EPOXY PRIMER HP EPOXY HARDENER THINNER |
SANDABLE SURFACER 1 1 na |
WET ON WET 1 1 na |
SEALER SURFACER 1 1 na |
  |
Pot Life |
16 hours @ 20° C |
16 hours @ 20° C |
16 hours @ 20° C |
|
|
Viscosty-DIN4 20° C. |
17" |
17" |
17" |
|
|
Spray gun set up |
1,4 - 1,8 mm. |
1,4 - 1,8 mm. |
1,4 - 1,8 mm. |
|
|
Number of Coats |
2 - 4 |
2 - 4 |
1 full |
|
|
Drying times Through dry @ 20° C. Through dry @ 60° C. |
4 hours 30 minutes |
na na |
na na |
|
|
For additional information, consult technical data sheet 229. |
|||
